维可牢耐热套管
承受持续温度:260℃ (500℉)
承受 1090℃ (2000℉) 约 15~20分钟
承受瞬间 1650℃ (3000℉) 约 15~30秒
尺寸:3/4英吋 (19公厘) ~ 4-1/2英吋 (115公厘)
导热系数 (K-Factor):
航天工业品级 K=0.610 BTU-in./hr-ft2-℉
绝缘性能 (电介质破坏电压数):
平均值:7.3kV;最小值 5.0kV;最大值 10.0kV
●特点:易于现场安装,不需拆卸管路
Pyrojacket VCO option is the solution to shutting down equipment and
disconnecting hoses and cables to install heat protective sleeving.
使用维可牢耐热套管的最大优点,就是在安装热保护套管时,
不需要停用设备也不需要拆卸
软管和缆线。The VCO option is factory installed, to ensure correct fit and structural integrity.
Using high temperature fiberglass thread, a flame retardant hook and loop closure
is sewn internally. Pyrojacket VCO is adjusted for size, to allow for the overlap
where hook and loop closures meet.
维可牢的另一项优点是可以在工厂内现场安装,以确保正确的密合度和结构的完整性。维可
牢耐热套管采用高温玻璃纤维,内部缝合有耐火阻燃的黏扣带。维可牢耐热套管调整至适当
尺寸时,即可利用黏扣带紧密结合。
yrojacket VCO is available in sizes from 3/4” (19mm) to 4-1/2” (115mm) diameter.
3/4英吋(19公厘) 至直径 4-1/2英吋(115公厘)。
维可牢耐热套管
Part Number and Dimension List
规 格 编 号 及 尺 寸 表
INDUSTRIAL GRADE PYROJACKET
WITH VELCRO CLOSURE OPTION
一般工业品级
PJVCO-22 PJVCO-24 PJVCO-26 PJVCO-28 PJVCO-32 PJVCO-36 PJVCO-40 PJVCO-44
PJVCO-48 PJVCO-52 PJVCO-56 PJVCO-60 PJVCO-64 PJVCO-72
PJ-12 PJ-14 PJ-16 PJ-18 PJ-20 PJ-22 PJ-24 PJ-26 PJ-28 PJ-32 PJ-32 PJ-36 PJ-40 PJ-44
PJ-48 PJ-52 PJ-56 J-60 PJ-60 PJ-64 PJ-72 PJ-80